Industrial & Commercial Flooring in Marietta, GA
Epoxy, Urethane & Polished Concrete for Cobb County Facilities
Marietta builds aircraft. Lockheed Martin's eight-million-square-foot facility sits next to Dobbins Air Reserve Base turning out C-130J airframes and F-35 center wing assemblies, and Cobb County has spent years attracting the tier-one and tier-two suppliers that want to operate near it. That concentration sets the standard for flooring here: heavy point loads, aggressive fluids, and environments that do not forgive a floor that dusts or delaminates.
The rest of the county adds its own demands. South Cobb and the I-20 corridor have long been the area's industrial spine, with manufacturing, distribution, and chemical operations running in building stock that in many cases dates to mid-century. Add the healthcare footprint and the commercial space around Marietta Square, and a flooring contractor here has to specify credibly across aerospace, chemical, clinical, and warehouse environments.
We assess the slab, specify to the loading and exposure you actually have, and put expected service life in writing. Extreme IFC has handled government and defense facility flooring, including a FEMA kitchen floor another contractor had written off as unrepairable, which earned an industry Project of the Year award.
Flooring Systems in Marietta
Aerospace and MRO floors. Hangars, maintenance bays, and assembly areas dealing with point loading from jacks and stands, dropped tooling, and hydraulic fluids that strip ordinary coatings. High-build epoxy with urethane topcoats specified for the actual chemical exposure.
Manufacturing and supplier plants. Production floors, machine bays, and QC areas for the tier-one and tier-two operations clustered around Lockheed and Dobbins, with line striping and safety marking included.
Chemical and process environments. Containment areas, secondary containment, and process floors where spill resistance and cleanability are compliance requirements rather than preferences.
Warehouse and distribution. High-build epoxy or polished concrete for the South Cobb and I-20 industrial corridor, specified by forklift traffic and rack loading.
Healthcare and commercial. Seamless, disinfectable systems for clinical space, and polished or decorative concrete for offices and retail around Marietta Square.
Surface Prep & Concrete Repair in Marietta
Marietta's industrial building stock is old, and that is the defining challenge here. Slabs poured in the fifties and sixties were not built with vapor barriers, and many carry decades of oil saturation, layered failed coatings, and joint damage from years of forklift traffic.
We shot blast and diamond grind to profile, remove old coatings and adhesive, and address oil contamination properly instead of sealing over it, which is the most common reason a Cobb County floor fails twice. Joints and cracks get repaired and filled to carry load.
Moisture testing comes first on any older slab. If readings are high, a moisture-mitigating primer or a urethane cement system is the fix, and specifying for it up front costs a fraction of tearing out a delaminated floor during a production window.
Why Marietta facilities choose Extreme IFC
Specialists, not generalists. Two decades on high-performance concrete and resinous flooring for industrial and commercial facilities.
Comfortable with the hard ones. Government and defense facility work included, plus a FEMA kitchen floor other contractors had rejected as unrepairable that went on to win an industry Project of the Year award.
Old slabs are our normal. Cobb County's mid-century industrial stock needs contamination removal and moisture mitigation, not just a fresh coating.
We work your shutdown window. Nights, weekends, phased installs, and fast-cure systems when the line cannot stop.
We tell you when epoxy is the wrong answer. Sometimes polished concrete costs less over its life. The recommendation follows your facility, not our catalog.
What People Say About Us
★★★★★
A note from the owner
Will Gleeson · Owner, Extreme Industrial Flooring Contractor
Marietta Industrial Flooring FAQs
Who installs industrial concrete flooring in Marietta, GA?
Extreme IFC installs epoxy and urethane systems, polished concrete, and industrial coatings for facilities across Marietta and Cobb County. We have worked across Atlanta and the Southeast for more than two decades, including government and defense facility flooring.
What flooring works in an aerospace or MRO facility?
A high-build epoxy with a urethane topcoat, specified for the fluids actually present. Hangar and maintenance bay floors face point loading from jacks and stands plus hydraulic fluids and solvents that will soften or lift a standard coating. The topcoat selection matters more than the epoxy underneath it.
Why do coatings fail on older Cobb County slabs?
Oil saturation and moisture. Much of Marietta's industrial building stock dates to the mid-century and was poured without a vapor barrier, and decades of production leave oil driven deep into the concrete. Coating over either one guarantees a second failure. Both have to be dealt with during prep.
Can you install without stopping production?
Usually. We schedule around your line, work nights and weekends, and phase larger areas so part of the floor stays in service. Fast-cure systems add material cost but return the floor to use in hours rather than days.
How much does industrial flooring cost in Marietta?
Most industrial systems run $4 to $12 per square foot installed. On older slabs the prep and remediation work often costs more than the coating, which is why a moisture test and slab assessment should come before any quote you take seriously.